Skip to content Skip to main navigation Report an accessibility issue

Non-refereed proceedings

Schmitz, T., 2024, Spindle speed selection in additive friction stir deposition for desired temperature, American Society for Precision Engineering Annual Meeting, November 4-8, Houston, TX.

Schmitz, T., 2024, A sample partitioning approach for milling stability modeling with chatter frequency test point selection, American Society for Precision Engineering Annual Meeting, November 4-8, Houston, TX.

Dvorak, J., Zameroski, R., and Schmitz, T., 2024, Performance and uncertainty evaluation of optical coordinate metrology for hybrid manufacturing, American Society for Precision Engineering Annual Meeting, November 4-8, Houston, TX.

Zameroski, R., Ramsauer, C., Habersohn, C., Bleicher, F., and Schmitz, T., 2024, Constrained-motion drilling dynamometer design and evaluation, American Society for Precision Engineering Annual Meeting, November 4-8, Houston, TX.

Corson, G., Tyler, C., and Schmitz, T., 2024, Velocity dependent process damping calibration in milling, American Society for Precision Engineering Annual Meeting, November 4-8, Houston, TX.

Nwabueze, T., Zameroski, R., and Schmitz, T., 2024, Performance evaluation for Hall effect sensors based on configuration, American Society for Precision Engineering Annual Meeting, November 4-8, Houston, TX.

Baruah, S., Spezia, T., Patterson, R., Nazario, J., and Schmitz, T., 2024, Upcycling machining chips for a circular economy in additive friction stir deposition, American Society for Precision Engineering Annual Meeting, November 4-8, Houston, TX.

Garcia, R. and Schmitz, T., 2024, Surface finish prediction of modulated tool path of tapered workpieces, American Society for Precision Engineering Annual Meeting, November 4-8, Houston, TX.

Woodard, T., Edwards, B., Patterson, R., Charles, E., Schmitz, T., 2024, Additive friction stir deposition dynamometer design and evaluation, American Society for Precision Engineering Annual Meeting, November 4-8, Houston, TX.

Woodard, T., Honeycutt, A., Greene, J., and Schmitz, T., 2024, Design and fabrication of desktop CNC milling machine, American Society for Precision Engineering Annual Meeting, November 4-8, Houston, TX.

Poon, J., West, J., Betters, E., Smith, S., Tyler, C., and Schmitz, T., 2024, Challenges with metal big area additive manufacturing for machine tool cross beam manufacturing, American Society for Precision Engineering Annual Meeting, November 4-8, Houston, TX.

Sargent, K., Peter, H., Penney, J., and Schmitz, T., 2024, Repeatability of robotic WAAM geometric and mechanical properties for aluminum printing, American Society for Precision Engineering Annual Meeting, November 4-8, Houston, TX.

Garcia, R., Schmitz, T., Canfield, B., Terekhov, A., Moeller, T., and Costa, L, 2022, Preliminary cutting force and tool wear study for micro-patterned turning inserts, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Dvorak, J., Gilmer, D., Zameroski, R., Cornelius, A., and Schmitz, T., 2022, Fabrication of freeform silicon carbide components by hybrid manufacturing, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Jacobs, L. and Schmitz, T., 2022, Repeatability and reproducibility studies for structured light scanning, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Nwabueze, T., Frampton, N., Tyler, C., Karandikar, J., and Schmitz, T., 2022, LIMS data collection and analysis for machining monitoring, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Corson, G., Karandikar, J., and Schmitz, T., 2022, Structural dynamics modeling and machine learning for integral blade rotor milling, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Jared, B., Cornelius, A., Miramontes, E., Quigley, T., Penney, J., Schmitz, T., Hamel, W., 2022, Large-scale hybrid manufacturing of freeform metal components, American Society for Precision Engineering Annual Meeting, October 10-14, Belleview, WA.

Poon, T., West, J., Betters, E., Smith, S., Tyler, C., and Schmitz, T., 2022, Design considerations for additive manufacturing of machine tool structural components, American Society for Precision Engineering Annual Meeting, October 10-14, Belleview, WA.

Schmitz, T., Nazario, J., No, T., Gomez, M. and Corson, G., 2022, Time-domain simulation and testing for dynamic force and stability prediction in milling: Collaboration with feed rate scheduling software, Joint 8th IFAC Symposium on System Structure and Control, 17th IFAC Workshop on Time Delay Systems, 5th IFAC Workshop on Linear Parameter Varying Systems, September 27-30, Montreal, Canada.

Gomez, M. and Schmitz, T., 2021, Tool wear evaluation using a constrained-motion dynamometer, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Gomez, M. and Schmitz, T., 2021, Stability analysis of a constrained-motion dynamometer, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Schmitz, T., Cornelius, A., Dvorak, J., Nazario, J., Betters, E., Smith, S., Blue,  C., Harmon, J., Morrison, M., Blevins, T., and Hopkins, J., 2021, CNC machining and metrology training: ACE program update, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Karandikar, J., Ramsauer, C., Leitner, D., Schmitz, T., and Bleicher, F., 2021, Remote Bayesian updating for milling stability, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Shen, J.-J., Patterson, M.R., Marshall, E., Dvorak, J., Romberg, S., Compton, B., and Schmitz, T., 2021, Effects of surface treatments on ABS mechanical properties from fused filament fabrication, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Penney, J., Cornelius, A., Vals, E., Dvorak, J., Buckley, M., Jacobs, L., Corson, G., Hamel, W., Jared, B., and Schmitz, T., 2021, Hybrid manufacturing cell design and construction, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Corson, G., Karandikar, J., and Schmitz, T., 2021, Integral blade rotor milling improvement by physics-guided machine learning, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Jared, B., Miramontes, E., Hamel, W., Penney, J., Schmitz, T., and Robbins, J., 2021, Multi-material component optimization via hybrid manufacturing, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

No, T., Gomez, M., and Schmitz, T., 2021, Milling force prediction case study for non-standard geometry endmill using structured light scanning, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Zameroski, R., Gomez, M., and Schmitz, T., 2021, Optical knife-edge displacement sensor modeling, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Corson, G., Compton, B., Gomez, M., and Schmitz, T., 2021, Internal feature design for increased damping by captured powder, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

Dvorak, J., Cornelius, A., Corson, G., Zameroski, R., Jacobs, L., Penney, J., and Schmitz, T., 2021, Machining considerations for WAAM preforms, American Society for Precision Engineering Annual Meeting, November 1-5, Minneapolis, MN.

West, J., Betters, E., and Schmitz, T., 2020, Captured powder damping in additive manufacturing, American Society for Precision Engineering Annual Meeting, October 20-22 (virtual).

Schmitz, T., Gomez, M., Honeycutt, A., Karandikar, J., Shim, J., Ro, S.-K., and  Hwang, J., 2020, Stability analysis with uncertainty for twist drilling, American Society for Precision Engineering Annual Meeting, October 20-22 (virtual).

Gomez, M. and Schmitz, T., 2020, Milling force measurement using a low-cost, constrained-motion dynamometer, American Society for Precision Engineering Annual Meeting, October 20-22 (virtual).

Copenhaver, R. and Schmitz, T., 2020, Modeling and simulation of modulated tool path (MTP) turning stability, American Society for Precision Engineering Annual Meeting, October 20-22 (virtual).

Schmitz, T., 2020, Tool point receptance variation with spindle-holder-tool selection, American Society for Precision Engineering Annual Meeting, October 20-22 (virtual).

Betters, E., West, J., and Schmitz, T., 2020, Comparison of dynamic stiffness in tombstone materials, American Society for Precision Engineering Annual Meeting, October 20-22 (virtual).

Jiang, J., Nogueira, M., Greis, N., Bhattacharya, S., and Schmitz, T., 2019, Machine learning with updating for milling stability, American Society for Precision Engineering Annual Meeting, October 28-November 1, Pittsburgh, PA.

West, J., Betters, E., and Schmitz, T., 2019, Low cost platform for hybrid manufacturing of light metals, American Society for Precision Engineering Annual Meeting, October 28-November 1, Pittsburgh, PA.

No, T., Gomez, M., Copenhaver, R., and Schmitz, T., 2019, Structured light scanning for endmill modeling, American Society for Precision Engineering Annual Meeting, October 28-November 1, Pittsburgh, PA.

Betters, E., West, J., Noakes, M., Nycz, A., Smith, S., and Schmitz, T., 2019, Additive manufacturing of internal features for manipulation of structural dynamics, American Society for Precision Engineering Annual Meeting, October 28-November 1, Pittsburgh, PA.

Gomez, M., Betters, E., Eichenberger, J., Delio, T., and Schmitz, T., 2019, Laser Doppler vibrometry for machining dynamics analysis, American Society for Precision Engineering Annual Meeting, October 28-November 1, Pittsburgh, PA.

No, T. and Schmitz, T., 2019, Tool edge geometry from structure light scanning, American Society for Precision Engineering Annual Meeting, October 28-November 1, Pittsburgh, PA.

Sizemore, N., Nogueira, M., Greis, N., Schmitz, T., and Davies, M., 2019, Machine learning model for surface finish in ultra-precision diamond turning, Model-Based Enterprise Summit 2019 (MBE 2019), April 1-4, Gaithersburg, MD.

Honeycutt, A. and Schmitz, T., 2018, The effect of symmetric and asymmetric dynamics on period-n bifurcations, American Society for Precision Engineering Annual Meeting, November 4-9, Las Vegas, NV.

Lee, C., Tarbutton, J., and Schmitz, T., 2018, An investigation of cosine error for scanning probe measurements of freeform surfaces, American Society for Precision Engineering Annual Meeting, November 4-9, Las Vegas, NV.

Gomez, M. and Schmitz, T., 2018, Determination of cutting forces using a flexure-based dynamometer: Deconvolution of structural dynamics using the frequency response function, American Society for Precision Engineering Annual Meeting, November 4-9, Las Vegas, NV (Winner: Best Poster Presentation Award).

Cossack, C., Ziegert, J., and Schmitz, T., 2018, Frequency response functions for sliding friction contacts, American Society for Precision Engineering Annual Meeting, November 4-9, Las Vegas, NV.

Gomez, M., Copenhaver, R., Stokes, T.M., Betters, E., and Schmitz, T., 2018, Development of a flexure-based modal hammer, American Society for Precision Engineering Annual Meeting, November 4-9, Las Vegas, NV.

Copenhaver, R. and Schmitz, T., 2018, Modulated tool path turning stability analysis, American Society for Precision Engineering Annual Meeting, November 4-9, Las Vegas, NV.

Honeycutt, A. and Schmitz, T., 2018, Direction-dependent receptances for anisotropic nickel superalloy, American Society for Precision Engineering Annual Meeting, November 4-9, Las Vegas, NV.

Pawar, A. and Schmitz, T., 2018, Analysis of wound irrigation devices, American Society for Precision Engineering Annual Meeting, November 4-9, Las Vegas, NV.

Honeycutt, A. and Schmitz, T., 2018, Optimizing Manufacturing Efficiency through Computer Simulation, 18th Annual Graduate Research Symposium, April 6, UNC Charlotte, Charlotte, NC.

Copenhaver, R. and Schmitz, T., 2018, Periodic Sampling in Modulated Tool Path Turning to Determine Cutting Stability, 18th Annual Graduate Research Symposium, April 6, UNC Charlotte, Charlotte, NC.

Honeycutt, A. and Schmitz, T., 2017, An Examination of Surface Location Error and Surface Roughness for Period-2 Instability in Milling, American Society for Precision Engineering Annual Meeting, October 29-November 3, Charlotte, NC.

Honeycutt, A. and Schmitz, T., 2017, Fixed-Free Beam Dynamics Prediction for Thin Rib Machining by RCSA, American Society for Precision Engineering Annual Meeting, October 29-November 3, Charlotte, NC.

Satyanarayana, H. and Schmitz, T., 2017, Compensation of Measured Frequency Response Functions Using Accelerometer Models and Inverse RCSA, American Society for Precision Engineering Annual Meeting, October 29-November 3, Charlotte, NC.

Copenhaver, R., Ziegert, J., and Schmitz, T., 2017, Stability in Modulated Tool Path Turning, American Society for Precision Engineering Annual Meeting, October 29-November 3, Charlotte, NC.

Schmitz, T., Greis, N., and Ziegert, J., 2017, M-Uber: Uber-type Assignment for Distributed Operator Machining Operations, American Society for Precision Engineering Annual Meeting, October 29-November 3, Charlotte, NC.

Kossack, C., Schmitz, T., and Ziegert, J., 2017, Identification of Friction Energy Dissipation using Free Vibration Velocity: Measurement and Modeling, American Society for Precision Engineering Annual Meeting, October 29-November 3, Charlotte, NC.

Gomez, M., Vaccaro, C., Maness, C., Lawrence, C., Murray, C., Vargas, L., Caskey, G., Evans, C., and Schmitz, T., 2017, An Evaluation of Non-contact Laser Scanner Performance Using Calibrated Artifacts, American Society for Precision Engineering Annual Meeting, October 29-November 3, Charlotte, NC.

Gomez, M., Honeycutt, A., Heigel, J., and Schmitz, T., 2017, Effect of the Additive Manufacturing Process on Cutting Forces in Hybrid Manufacturing, American Society for Precision Engineering Annual Meeting, October 29-November 3, Charlotte, NC.

Rubeo, M., Copenhaver, R., Landge, S., and Schmitz, T., 2016, Experimental Platform for In-process Metrology during Orthogonal Turning, American Society for Precision Engineering Annual Meeting, October 23-28, Portland, OR.

Lomascolo, C., Ziegert, J., and Schmitz, T., 2016, Displacement-based Measurement of Static and Dynamic Coefficients of Friction, American Society for Precision Engineering Annual Meeting, October 23-28, Portland, OR.

Landge, S. and Schmitz, T., 2016, Comparison of Analytical Milling Stability Analyses with Time Domain Simulation, American Society for Precision Engineering Annual Meeting, October 23-28, Portland, OR.

Honeycutt, A. and Schmitz, T., 2016, Period-n Bifurcations in Milling: Numerical and Experimental Verification, American Society for Precision Engineering Annual Meeting, October 23-28, Portland, OR.

Kiran, K., Satyanarayana, H., Song, C.K., and Schmitz, T., 2016, Mass Loading Compensation for Frequency Response Function Measurements by Inverse RCSA, American Society for Precision Engineering Annual Meeting, October 23-28, Portland, OR.

Lu, C., Ellis, J., Schmitz, T., and Tarbutton, J., 2015, Improvement of a Periodic Error Compensation Algorithm Based on the Continuous Wavelet Transform, American Society for Precision Engineering Annual Meeting, November 1-6, Austin, TX.

Tyler, C. and Schmitz, T. 2015, Process Damping Identification for Multiple Degree of Freedom Turning Operations, American Society for Precision Engineering Annual Meeting, November 1-6, Austin, TX.

Troutman, J., Owen, J., Davies, M., and Schmitz, T. 2015, Cutting Force Measurement During Diamond Flycutting of Chalcogenide Glass, American Society for Precision Engineering Annual Meeting, November 1-6, Austin, TX.

Rubeo, M. and Schmitz, T. 2015, Time Domain Modeling of Compliant Workpiece Milling, American Society for Precision Engineering Annual Meeting, November 1-6, Austin, TX.

Ransom, T., Honeycutt, A., and Schmitz, T. 2015, Tunable Dynamics Platform for Milling Experiments, American Society for Precision Engineering Annual Meeting, November 1-6, Austin, TX.

Schmitz, T. 2015, Microphone Squeal and Machining Chatter, American Society for Precision Engineering Annual Meeting, November 1-6, Austin, TX.

Menezes, J., Kiran, K., and Schmitz, T. 2015, Analytical Model of Thin Plate Dynamics, American Society for Precision Engineering Annual Meeting, November 1-6, Austin, TX.

Honeycutt, A. and Schmitz, T. 2015, Milling Bifurcation at Extended Axial Depths of Cut, American Society for Precision Engineering Annual Meeting, November 1-6, Austin, TX.

Troutman, J., Ganguly, V., Nguyen, N., and Schmitz, T. 2014, Evaluation of Periodic Error Compensation using a Time Domain Regression Algorithm, American Society for Precision Engineering Annual Meeting, November 9-14, Boston, MA.

Davies, M., Schmitz, T., and Burns, T., 2014, The Stability of Milling: An Impact Oscillator with Delay, 17th U.S. National Congress on Theoretical and Applied Mechanics, June 15-20, East Lansing, MI.

Blood, D., Schmitz, T., and Sheplak, M., 2014, Reduction of Ablation Plume Shading Effect for Ultrashort Pulsed Laser Micromachining of Silicon, Hilton Head Workshop, 2014, June 8-12, Hilton Head Island, SC.

Lu, C., Gillmer, S., Ellis, J., Schmitz, T., Troutman, J., and Tarbutton, J., 2013, Application of Wavelet Analysis in Heterodyne Interferometry, American Society for Precision Engineering Annual Meeting, October 20-25, St. Paul, MN.

Ganguly, V. and Schmitz, T., 2013, Correction for Amplifier-induced Phase Lag in Capacitance Gage Measurements, American Society for Precision Engineering Annual Meeting, October 20-October 25, St. Paul, MN.

Tyler, C. and Schmitz, T., 2013, Developing a Machining Model Database for Hard-to-Machine Materials, American Society for Precision Engineering Annual Meeting, October 20-October 25, St. Paul, MN.

Schmitz, T., Ganguly, V., Yun, J., and Loughridge, R., 2013, Periodic Error Correction in Heterodyne Interferometry, 2013 American Control Conference, June 17-June 19, 2013, Washington, DC.

Chaudhuri, A., Haftka, R.T., Ifju, P., Villanueva, D., Chang, K., Rue, J., Tyler, C., and Schmitz, T., 2013, Experimental Optimization and Uncertainty Quantification of Flapping Wing of a Micro Air Vehicle, 10th World Congress on Structural and Multidisciplinary Optimization, May 19 -24, 2013, Orlando, FL.

Graziano, A., Ganguly, V., Schmitz, T., and Yamaguchi, H., 2013, Characteristics of Cobalt Chromium Alloy Surfaces Finished Using Magnetic Abrasive Finishing, Student Symposium on Health Professions, College of Medicine at the University of Central Florida, April 6, 2013, Orlando, FL.

Ganguly, V., Schmitz, T., White, D., and Yun, J., 2012, Experimental Evaluation of Phase Digitizing Nonlinearity Correction in Heterodyne Interferometry, American Society for Precision Engineering Annual Meeting, October 21-October 26, San Diego, CA.

Jarandikar, J., Abbas, A., and Schmitz, T., 2012, Remaining Useful Tool Life Predictions using Bayesian Inference, American Society for Precision Engineering Annual Meeting, October 21-October 26, San Diego, CA.

Tyler, C. and Schmitz, T., 2012, Process Damping Analytical Stability Analysis and Prediction, American Society for Precision Engineering Annual Meeting, October 21-October 26, San Diego, CA.

Schmitz, T. and Dutterer, B., 2012, Machine Tool Genome Project Case Study, American Society for Precision Engineering Annual Meeting, October 21-October 26, San Diego, CA.

Ganguly, V., Schmitz, T., Graziano, A., and Yamaguchi, H., 2012, An Analysis of Polishing Forces in Magnetic Field Assisted Finishing, American Society for Precision Engineering Annual Meeting, October 21-October 26, San Diego, CA.

Yamaguchi, H., Schmitz, T., Graziano, A., and Ganguly, V., 2012, Surface Functionalization by Magnetic Field Assisted Finishing, NSF-CMMI Research and Innovation Conference, 7 pages (CD-ROM).

Kim, H.S. and Schmitz, T., 2011, The Influence of Curing Time on Hydroxide Catalysis Bonding Strength, Proceedings of the American Society for Precision Engineering Annual Meeting, November 13-November 18, Denver, CO.

Karandikar, J., Abbas, A., and Schmitz, T., 2011, Bayesian Updating Using the Markov Chain Monte Carlo Method to Determine Force Coefficients in End Milling, Proceedings of the American Society for Precision Engineering Annual Meeting, November 13-November 18, Denver, CO.

Pope, M., Schmitz, T., and Cox, P., 2011, Thickness Measurements of the Gas Distribution Layer for a Direct Methanol Fuel Cell, Proceedings of the American Society for Precision Engineering Annual Meeting, November 13-November 18, Denver, CO.

Johnson, M. and Schmitz, T., 2011, A New Machining Cost Calculator (MC2), Proceedings of the American Society for Precision Engineering Annual Meeting, November 13-November 18, Denver, CO.

Kim, H.S. and Schmitz, T., 2010, Evaluation of Hydroxide Catalysis Bonding Strength, Proceedings of American Society for Precision Engineering Annual Meeting, October 31-November 4, Atlanta, GA.

Graziano, A., Joslin, A., and Schmitz, T., 2010, Sensor Design for On-machine Probing of Extruded Tool Joints, Proceedings of American Society for Precision Engineering Annual Meeting, October 31-November 4, Atlanta, GA.

Ganguly, V., Kim, N.H., Kim, H.S., and Schmitz, T., 2010, Evaluating the Sensitivity of Periodic Errors in Heterodyne Interferometry, Proceedings of American Society for Precision Engineering Annual Meeting, October 31-November 4, Atlanta, GA.

Kumar, U., Riggs, A., and Schmitz, T., 2010, Improved Spindle Dynamics Identification Techniques for Receptance Coupling Substructure Analysis (RCSA), Proceedings of American Society for Precision Engineering Annual Meeting, October 31-November 4, Atlanta, GA.

Karandikar, J., Zapata, R., and Schmitz, T., 2010, Combining Tool Wear and Stability in High-speed Machining Performance Prediction, Proceedings of American Society for Precision Engineering Annual Meeting, October 31-November 4, Atlanta, GA.

Ganguly, V., Kim, N.H., Kim, H.S., and Schmitz, T., 2010, Sensitivity Analysis of Periodic Error in Heterodyne Interferometry, Proceedings of the ASPE 2010 Summer Topical Meeting on Precision Interferometric Metrology, June 23-25, Asheville, NC, pp. 5-10.

Kumanchik, L., Schmitz, T., and Pratt, J., 2009, Validation of Cantilever Shape Analysis for Force Measurement, Proceedings of American Society for Precision Engineering Annual Meeting, October 4-9, Monterey, CA.

Schluchter, C., Chu, D., Ganguly, V., and Schmitz, T., 2009, Real-time Periodic Error Compensation with Low/Zero Velocity Parameter Updates, Proceedings of American Society for Precision Engineering Annual Meeting, October 4-9, Monterey, CA.

Kim, H.S., Schmitz, T., and Rueff, M., 2009, Size Reduction of Acousto-optic Modulator-based Heterodyne Displacement Measuring Interferometer (AOM DMI), Proceedings of American Society for Precision Engineering Annual Meeting, October 4-9, Monterey, CA.

Traverso, M., Zapata, R., Schmitz, T., and Abbas, A., 2009, Developing a Predictive Model for Milling Stability, Proceedings of American Society for Precision Engineering Annual Meeting, October 4-9, Monterey, CA.

Mauntler, N., Mukras, S., Kim, N.H., Sawyer, W.G., and Schmitz, T., 2009, Kinematic and Dynamic Behavior of a Wearing Joint in a Crank-slider Mechanism, Proceedings of American Society for Precision Engineering Annual Meeting, October 4-9, Monterey, CA.

Karandikar, J., Zapata, R., and Schmitz, T., 2009, The Milling Dynamics “Super Diagram”: Combining Stability, Surface Location Error, Tool Wear, and Uncertainty, Proceedings of American Society for Precision Engineering Annual Meeting, October 4-9, Monterey, CA.

Schmitz, T. and Graziano, A., 2009, Application of Receptance Coupling to Torsional and Axial Frequency Response Prediction, Proceedings of American Society for Precision Engineering Annual Meeting, October 4-9, Monterey, CA.

Schmitz, T. and Kim, H.S., 2009, Experimental Validation of the Acousto-optic Modulator-based Displacement Measuring Interferometer (AOM DMI), Proceedings of 2009 NSF Engineering Research and Innovation Conference, June 22-25, Honolulu, HI.

Schmitz, T., Graziano, A., and DeMarco, C., 2009, Extending RCSA for Torsional and Axial Receptance Predictions, Proceedings of 2009 NSF Engineering Research and Innovation Conference, June 22-25, Honolulu, HI.

Abbas, A., Schmitz, T., Traverso, M., and Zapata, R., 2009, Bayesian Methods for Milling Stability Prediction, Proceedings of 2009 NSF Engineering Research and Innovation Conference, June 22-25, Honolulu, HI.

Kim, N.H., Mukras, S., Mauntler, N., Schmitz, T., and Sawyer, W.G., 2009, Measuring Contact Load and Wear Evolution in a Revolute Joint Bushing, Proceedings of 2009 NSF Engineering Research and Innovation Conference, June 22-25, Honolulu, HI.

Kumanchik, L., Schmitz, T., and Pratt, J., 2008, A Platform for Observing the Behavior of AFM Cantilevers During Quasi-static Loading, Proceedings of American Society for Precision Engineering Annual Meeting, October 19-24, Portland, OR.

Zapata, R., Traverso, M., Abbas, A., and Schmitz, T., 2008, Bayesian Updating of Stability Beliefs, Proceedings of American Society for Precision Engineering Annual Meeting, October 19-24, Portland, OR.

Schmitz, T., Zapata, R., and DeMarco, C., 2008, The Milling Dynamics “Super Diagram”: Combining Stability and Surface Location Error, Proceedings of American Society for Precision Engineering Annual Meeting, October 19-24, Portland, OR.

Kim, H.S. and Schmitz, T., 2008, A New Heterodyne Interferometer with Zero Periodic Error and Tunable Beat Frequency, Proceedings of American Society for Precision Engineering Annual Meeting, October 19-24, Portland, OR.

Schmitz, T., 2008, Modeling and Prediction for Improved High-Speed Machining Performance, Proceedings of the American Society for Precision Engineering Topical Meeting on Machine Tools, International Manufacturing Technology Show, September 8-11, Chicago, IL (7 pages).

Kim, N.H., Banks, S., Sawyer, W.G., Schmitz, T., and Jackson, D., 2008, Modeling and Design Tools of Mechanical Joints with Evolving Kinematics, NSF CMMI Engineering Research and Innovation Conference 2008, January 7-10, Knoxville, TN.

Abbas, A., Schmitz, T., Zapata, R., Hafiz, R., and Yang, L., 2008, Application of Decision Analysis to Milling Profit Maximization, NSF CMMI Engineering Research and Innovation Conference 2008, January 7-10, Knoxville, TN.

Schmitz, T., Cheng, C.-H., and Duncan, G.S., 2008, Application of RCSA to Rotating Tool Point FRF Prediction, NSF CMMI Engineering Research and Innovation Conference 2008, January 7-10, Knoxville, TN.

Kim, H.S. and Schmitz, T., 2008, Minimizing Periodic Error using a new Heterodyne Displacement Measuring Interferometer Design, NSF CMMI Engineering Research and Innovation Conference 2008, January 7-10, Knoxville, TN.

Kim, H.S., Schmitz, T., Chu, D., and Lee, H., 2007, First and Second Order Periodic Error Measurement for Non-constant Velocity Motions, Proceedings of American Society for Precision Engineering Annual Meeting, October 14-19, Dallas, TX.

Mauntler, N., Kim, N.-H., Sawyer, W.G., and Schmitz, T., 2007, Instrumented Crank Slider Mechanism for Validation of a Combined Finite Element Wear Model, Proceedings of American Society for Precision Engineering Annual Meeting, October 14-19, Dallas, TX.

Mauntler, N., Schmitz, T., Hamilton, M., Steffens, J., Argibay, N., Bares, J., and Sawyer, W.G., 2007, Tribometers for in situ Profilometry, Proceedings of the Society of Tribologists and Lubrication Engineers Annual Meeting, Philadelphia, PA.

Zapata, R., Schmitz, T., Abbas, A., and Liu, Y., 2007, Quantifying the Stability Uncertainty in a Milling Model, Proceedings of American Society for Precision Engineering Annual Meeting, October 14-19, Dallas, TX.

Kumanchik, L. and Schmitz, T., 2006, Improved Analytical Uncut Chip Thickness Model, Proceedings of American Society for Precision Engineering Annual Meeting, October 15-20, Monterey, CA.

Cheng, C.-H., Duncan, G.S., and Schmitz, T., 2006, Frequency Response Prediction for Rotating Tool-Holder-Spindle Assemblies, Proceedings of American Society for Precision Engineering Annual Meeting, October 15-20, Monterey, CA.

Houck III, L., Schmitz, T., and Smith, K.S., 2006, Tuned Holder for Boring Bars, Proceedings of American Society for Precision Engineering Annual Meeting, October 15-20, Monterey, CA.

Mauntler, N., Rennie, A., Schmitz, T., and Sawyer, W.G., 2006, Design and Testing of a Tribometer for In Situ Microscopy, Proceedings of American Society for Precision Engineering Annual Meeting, October 15-20, Monterey, CA.

Powell, K., Won, D., Schmitz, T., 1Duncan, G.S., Sawyer, W.G., Ziegert, J., 2006, Tool-Holder Connection Modeling for Frequency Response Prediction in Milling, Proceedings of American Society for Precision Engineering Annual Meeting, October 15-20, Monterey, CA.

Canning, J.S., Zapata, R., Ziegert, J., and Schmitz, T., 2006, A Comparative Study of Part Error Contributors in High-Speed Machining, Proceedings of American Society for Precision Engineering Annual Meeting, October 15-20, Monterey, CA.

Kurdi, M., Schmitz, T., and Haftka, R., 2006, Cost-Based Parameter Selection for Milling Considering Process Stability, Proceedings of American Society for Precision Engineering Annual Meeting, October 15-20, Monterey, CA.

Houck III, L., Schmitz, T., and Chu, D., 2006, Digital Periodic Error Correction: Further Testing and Results, Proceedings of American Society for Precision Engineering Annual Meeting, October 15-20, Monterey, CA.

Mauntler, N., Ziegert, J., and Schmitz, T., 2006, Dimensional Study of an Interference Fit Spinal Allograft, Proceedings of American Society for Precision Engineering Annual Meeting, October 15-20, Monterey, CA.

Schmitz, T., 2006, From Donor to Shop to Surgery, Modern Machine Shop, June, pp. 80-82.

Bardt, J., Ziegert, J., Schmitz, T., Sawyer, W.G., and Bourne, G., 2006, Precision Molding of Complex Metallic Micro-structures, Proceedings of the 1st International Conference on Micro-manufacturing (ICOMM), University of Illinois at Urbana-Champaign, IL, September 13-15.

Schmitz,T., Houck, L. Chu, D., and Kalem, L., 2005, Experimental Validation of Digital Periodic Error Correction, Proceedings of American Society for Precision Engineering Annual Meeting, October 9-14, Norfolk, VA.

Wan, D.-S., Schmitz,T., and Novak, E., 2005, Uncertainty Contributors for Optical Profiler with Internal Displacement Measuring Interferometer, Proceedings of American Society for Precision Engineering Annual Meeting, October 9-14, Norfolk, VA.

Duncan, G.S., Kurdi, M., and Schmitz,T., 2005, Stability Lobe Uncertainty, Proceedings of American Society for Precision Engineering Annual Meeting, October 9-14, Norfolk, VA.

Schmitz,T., 2005, Frequency Domain Surface Location Error Solution, Proceedings of American Society for Precision Engineering Annual Meeting, October 9-14, Norfolk, VA.

Bardt, J., Mauntler, N., Ziegert, J., Sawyer, W.G., and Schmitz,T., 2005, Precision Molding of Metallic Micro-components, Proceedings of American Society for Precision Engineering Annual Meeting, October 9-14, Norfolk, VA.

Schmitz,T., Houck, L. Chu, D., and Kalem, L., 2005, Real-time Periodic Error Correction: Experiment and Data Analysis, Proceedings of Precision Interferometric Metrology, American Society for Precision Engineering Summer Topical Meeting, July 20-22, Middletown, CT.

Arakere, N., Schmitz, T., and Cheng, C.-H., 2005, Rotor Dynamic Response of a High-Speed Machine Tool Spindle, Proceedings of the 2005 International Modal Analysis Conference (IMAC XXIII), Orlando, FL.

Duncan, G.S., and Schmitz, T., 2005, An Improved RCSA Model for Tool Point Frequency Response Prediction, Proceedings of the 2005 International Modal Analysis Conference (IMAC XXIII), Orlando, FL.

Schmitz, T., Duncan, G.S., Zahner, C., Dyer, J., and Tummond, M., 2005, Improved Milling Capabilities through Dynamics Prediction: Three Component Spindle-Holder-Tool Model, Proceedings of 2005 National Science Foundation DMII Grantees Conference, Scottsdale, AZ.

Duncan, G.S., and Schmitz, T., 2004, An Improved RCSA Model for Tool Point Frequency Response Prediction, Proceedings of the 19th American Society for Precision Engineering Annual Meeting, October 24-29, Orlando, FL, pp. 646-649.

Gardner, N., Brodziak, J., Schmitz, T., Davies, A., 2004, Traceable Radius Measurements for Micro-Lenses, Proceedings of Optics in the Southeast Conference, November 4-5, Charlotte, NC.

Schmitz, T. and Davies, A., 2004, Radius of Curvature Uncertainty: Nonlinear Measurand and Treatment, Proceedings of Uncertainty Analysis in Measurement and Design, American Society for Precision Engineering Summer Topical Meeting, June 30-July 1, State College, PA, pp. 78-82.

Schmitz, T., Ziegert, J., and Canning, J., 2004, Using Homogeneous Transformation Matrices to Define the Measurand for Uncertainty Analysis of Complex Measurement Systems, Proceedings of Uncertainty Analysis in Measurement and Design, American Society for Precision Engineering Summer Topical Meeting, June 30-July 1, State College, PA, pp. 113-121.

Burton, D., Duncan, G.S., Ziegert, J., and Schmitz, T., 2004, High Frequency, Low Force Dynamometer for Micro-Milling Force Measurement, Proceedings of the 19th American Society for Precision Engineering Annual Meeting, October 24-29, Orlando, FL, pp. 221-224.

Kurdi, M., Haftka, R., Schmitz, T., and Mann, B., 2004, Simultaneous Optimization of Removal Rate and Part Accuracy in High-Speed Milling, Proceedings of the 19th American Society for Precision Engineering Annual Meeting, October 24-29, 2004, Orlando, FL, pp. 617-620.

Tummond, M., Duncan, G.S., Zahner, C., and Schmitz, T., 2004, Dynamics Prediction for Internet-based High-Speed Milling Process Parameter Selection, Proceedings of the 2004 National Science Foundation Design, Service, and Manufacturing Grantees and Research Conference, January 5-8, Dallas, TX.

Schmitz, T., 2004, Compensation for Distortion of Dynamic Sensor Data using Receptance Coupling, Proceedings of the 19th American Society for Precision Engineering Annual Meeting, October 24-29, Orlando, FL, pp. 173-176.

Duncan, G.S., Tummond, M., and Schmitz, T., 2003, An Investigation of the Dynamic Absorber Effect in High-Speed Machining, Proceedings of the 18th American Society for Precision Engineering Annual Meeting, October 26-31, Portland, OR.

Schmitz, T., Tummond, M., and Duncan, G.S., Zahner, C., and Snyder, J., 2003, Development of an Internet-based Platform for High-Speed Milling Process Parameter Selection, Proceedings of the 18th American Society for Precision Engineering Annual Meeting, October 26-31, Portland, OR.

Schmitz, T., Action, J., Ziegert, J., and Sawyer, W., 2003, Dynamic Friction Coefficient Measurements: Device and Uncertainty Analysis, Proceedings of the 18th American Society for Precision Engineering Annual Meeting, October 26-31, Portland, OR.

Davies, A., Schmitz, T., 2003, Defining the Measurand in Radius of Curvature Measurements, Proceedings of the 18th American Society for Precision Engineering Annual Meeting, October 26-31, Portland, OR.

Schmitz, T., Davies, A., Evans, C., and Parks, R., 2003, Silicon Wafer Thickness Variation Measurements using Infrared Interferometry, Proceedings of American Society for Precision Engineering Winter Topical Meeting – Machines and Processes for Micro-scale and Meso-scale Fabrication, Metrology, and Assembly, January 22-23, Gainesville, FL, pp. 98-103.

Barton, T., Dickrell, D., Ziegert, J., Schmitz, T., Sawyer, W.G., 2003, Powder Delivery of Boric Acid for In-Situ Environmentally Friendly Lubrication, American Society of Mechanical Engineers and the Society of Tribologists and Lubrication Engineers Joint International Conference in Tribology, October, Jacksonville, FL.

Schmitz, T. and Burns, T., 2003, Receptance Coupling for High-Speed Machining Dynamics Prediction, Proceedings of the 21st International Modal Analysis Conference, February 3-6, Kissimmee, FL.

Schmitz, T., Bayly, P., Soons, J., and Dutterer, B., 2002, Prediction of Surface Location Error by Time Finite Element Analysis and Euler Integration, Proceedings of the 17th American Society for Precision Engineering Annual Meeting, October 20-25, St. Louis, MO, pp. 132-137.

Schmitz, T., Davies, M., and Dutterer, B., 2002, Applications in High-Speed Machining at the National Institute of Standards and Technology, Proceedings of Society of Manufacturing Engineers High Speed Machining 2002 Technical Conference, May 14-15, Los Angeles, CA (on CD, 20 pages).

Schmitz, T. and Griesmann, U., 2002, Interferometric Testing of 300 mm Si Wafers, International SEMATECH – NIST Day in Austin, July 30, Austin, TX (on CD, 1 page).

Griesmann, U., Schmitz, T., Soons, J., and Polvani, R., 2002, New Optical Metrology at NIST for Semiconductor Lithography, International SEMATECH – NIST Day in Austin, July 30, Austin, TX (on CD, 1 page).

Griesmann, U., Schmitz, T., Soons, J., and Polvani, R., 2002, New Optical Metrology at NIST for Semiconductor Lithography, Proceedings of American Society for Precision Engineering Spring Topical Meeting – Progress in Precision, April 17-18, Raleigh, NC.

Schmitz, T., 2001, Chatter Recognition by a Statistical Evaluation of the Synchronously Sampled Audio Signal, Proceedings of the 2001 India-USA Symposium on Emerging Trends in Vibration and Noise Engineering, December 10-14, Columbus, OH (on CD, 8 pages).

Medicus, K. and Schmitz, T., 2001, Evaluating Tool Point Dynamic Repeatability for High-Speed Machining Applications, Proceedings of the 16th Annual Meeting of the American Society for Precision Engineering, November 11-15, Arlington, VA.

Schmitz, T., 2001, Stability in High Speed Machining, Proceedings of Society of Manufacturing Engineers High Speed Machining 2001 Technical Conference, September 20-21, Northbrook, IL (on CD, 20 pages).

Davies, M., Schmitz, T., and Dutterer, B., 2001, How to Succeed at HSM, Manufacturing Engineering, Society of Manufacturing Engineers, March, pp. 90-104.

Schmitz, T., Evans, C., and Davies, A., 2000, An Investigation of Uncertainties Limiting Radius Measurement Performance, Proceedings of American Society for Precision Engineering 2000 Spring Topical Meeting – Precision Interferometric Metrology, May 10-12, Tucson, AZ, p. 27.

Davies, M., Burns, T., and Schmitz, T., 1999, High-Speed Machining Processes: Dynamics on Multiple Scales, Proceedings-Dynamics and Control of Mechanical Processing (Workshop organized by Working Group 2 Nonlinear Dynamics and Control in COST Action P4), Technical University of Budapest, Department of Applied Mechanics, November 12-13, Hungary, pp. 7-19.

Schmitz, T., 1999, The Implementation of Simultaneous Trilateration to Measure Dynamic Three-Dimensional Contours Using the Laser Ball Bar, Proceedings of the 14th Annual Meeting of the American Society for Precision Engineering, October 31-November 5, Monterey, CA, pp. 29-32.

Schmitz, T., 1998, Rapid Prototyping Using High Speed Machining, Prototyping Technology International, UK & International Press, UK, January/March, pp. 66-69.

Schmitz, T., 1998, 2-D Dynamic Path Measurement and Evaluation, Proceedings of the 1998 American Society of Mechanical Engineers Region XI Graduate Student Technical Conference, May 15-16, Florida Atlantic University, Boca Raton, FL, pp.28-30.

Schmitz, T., Badrawy, S., and Bernhard, D., 1997, Linear Displacement Accuracy: A Comparison of National Standards, Proceedings of the 12th Annual Meeting of the American Society for Precision Engineering, October 5-10, Norfolk, VA.

Schmitz, T., 1997, Ball-Socket Joint Coefficient of Friction Measurement, Proceedings of the 1997 American Society of Mechanical Engineers Region XI Graduate Student Technical Conference, May 16-17, University of South Alabama, Mobile, AL, pp. 12-14.

Schmitz, T. and Ziegert, J., 1996, Machining Virtual Test Parts, Proceedings of the 11th Annual Meeting of the American Society for Precision Engineering, November 9-14, Monterey, CA, pp. 118-121.